Vintage Electronics Blogsphere

If you're under the age of 30, you've probably never seen a turntable outside of a movie, and if you're under the age of 20, you may have never seen one in a movie. Turntables are used to play old vinyl LP's and records, and they work by dragging a needle lightly through a spiral groove on a record, going from the outer edge to the inner zone.

This needle would be used to make an oscillating electrical current, which was used to drive speakers and make a sound. A lot of the audio technologies we take for granted (High Fidelity, stereo sound) were first pioneered in turntables.

Turntables were supplanted by CD players on the market in the 1990s. It was in the late '80s that sales of new titles on CD supplanted those on vinyl LP's, and most record labels quickly switched formats to the CD, which allowed customers to select which track they wanted more readily, were smaller, cheaper to produce, and produced a more pristine sound.

What's changed since then is audiophile appreciation of the turntable. The analog reproduction mechanism makes a sound that's more 'alive' or 'warm' than a digital file, and lots of music from the '50s through early '80s never got re-encoded to digital formats. The current range of turntables mostly applies to nostalgia buffs, who want to either listen to music that isn't available on CD or MP3, or who want to experience the music the way it was experienced back in the days of vinyl.

Many turntables sold these days have modern enhancements - for example, digital signal processor chips in the turntable itself can be used to tune the sound as it comes through the needle, and is used to give needles sensitivity that they never had back in the days when spinning disks were king. Others try to remain true to their original manufacturing stats - if you want to experience a Rolling Stones LP from the '70s, you need a turntable build like those from the 1970s, forgoing many of the technological innovations that have come since then.

Still others, like turntables in the '80s, are multi-platform devices, able to play back CDs, LP's, cassette tapes and more. Quite a few, following the lead from several devices in the '90s, will transcribe an MP3 copy of the LP file. Modern high-end conversion files, in an attempt to give the benefits of vinyl in a format that can be played on an iPod, use amazingly high bitrate transcription modes to catch all the subtle undertones of the richer vinyl sound.

For true nostalgia buffs, nothing beats the warmth of vinyl, and some of the more retro designs for turntables come from Rek-O-Kut and Stanton, which, depending on their models, try to get the exact feel (including remanufacturing older parts) to get the exact same sound as a Vintage Turntable.

How to Choose Tools for Restoring Vintage Electronics

Working on vintage electronics is, surprisingly, not much different from working on modern electronics. The circuits of vintage electronics are probably more simplified compared to today’s complex technology, but the tools needed to repair them are pretty much the same. Here is how to choose tools for restoring vintage electronics.

Difficulty: Moderately Easy
Instructions

Things You'll Need:
Soldering iron
Solder (60-40 tin-lead)
Screwdrivers
Eyeglass repair kit
Wire cutters
1Most of the time, problems with vintage electronics are the result of circuit connections that have gone bad. So the most used tool you will have is a soldering iron. Because you will get a lot of use out of this tool, it is recommended to spend a few extra dollars to get a nice soldering iron that is less likely to break or burn out.
2Choose a solder to use on your circuits that is appropriate to the job you are doing. A common solder to use is a solder that is 60 percent tin and 40 percent lead. Make sure that you are using flux core solder. When dealing with electronics, the thinner the solder gauge the better (reserve the thick stuff for large wiring jobs).
3It is important to maintain a good set of screwdrivers. It is highly recommended to have at least one flat head screwdriver and one phillips head screwdriver. It is usually a good idea to have several screwdrivers in various sizes.
4Get an eyeglass repair kit to keep on hand for when you encounter particularly small screws in your vintage electronics.
5You may sometimes need to splice or replace a wire in your vintage electronics. Even though you may very well be able to do the job with your pocket knife, it is probably better to have a good set of wire cutters that have a built in wire stripper.

Most Expensive Vintage Electronics

Vintage Electronics

We can all use some extra money from time to time, especially in the current economic climate. Seasoned veteran collectors of vintage electronics can put their vast knowledge bases to good use to find items to sell at places such as eBay. The thriving vintage electronics section on eBay is the perfect meeting place for buyers and sellers, keen to either find a dream piece, or make some extra cash.

As we can clearly see high-end audio equipment dominates this list. Clearly audiophiles are making use of eBay to add to their collections.

Whilst many of us will not have direct access to a wide array of vintage electronics, there are many options for finding potentally profitable pieces. A common port of call are friends and relatives who might not be aware that they are sitting on a valuable piece. Many people will have a family member, or acquaintance, with a basement stuffed full of electronics that have been replaced by newer models. A quick proft sharing agreement later and you might just find a goldmine at your fingertips.

Don't miss the chance to search for vintage electronics at thrift shops, garage and estate sales. There are many hidden gems to be found with just a little persistence. Another alternative way to find vintage electronics is to advertise for them. Simply take out a classified ad on a site such as Craigslist that says you buy vintage electronics for cash. Whilst you will get some time wasters, you will be amazed at some of the calls you get offering items which you can easily "flip" for a profit.

One might look out, for example, vintage amps, old 8-track players, or even calculators from the 1970s or 1980s. Also be on the look out for books and manuals about these items. You may not find a piece worth thousands every day, but with a little persistence you will find pieces that will turn a healthy profit.

Vintage computer parts are also increasingly popular. Many people upgrade or replace their computers every few years. The old computers are either thrown away or left to gather dust in a basement until they see the light of day at garage or estate sale. With a little online research one can soon learn to recognise the things that will make money.

Also be on the look out for items such as vintage synthesizers. Minimog synthesizers, for example, can fetch several thousand dollars. Admirers of the Minimoog believe that it's sound sets it apart from all other brands, hence the fact that it can fetch some great prices.

It is also important not to overlook vintage electronic spare parts as a potentially hugely profitable sector. Whilst a particular piece may be broken beyond repair, it can often be scavenged for parts. Such parts may be hungrily snapped up by eager collectors desperate for that one particular spare part. If we look at altec spares on eBay, for example, we can see the huge range of spare parts available, many of which are picking up some nice bids.

Clearly there is a huge market for vintage electronics. Whether you are seasoned collector, or novice, you can quickly generate a handy cash flow that can soon grow into something more.

To find current electronics and other gadgets click here.